360 Back from the Machine Shop

Oh! :\

As previously mentioned the bottom is is Keith Black KB107 flat top pistons at zero deck on Eagle SIR rods.

The cam is a Comp Extreme Energy XE268H (268/280, 224/[email protected]", .477/.480, .509/.512 with the 1.6 ratio rockers)

Heads are a set of Magnum heads with 62cc chambers giving me 10.8:1 compression.

Intake is a Professional Products CrossWind dual plane. Still keeping my eyes open for a deal on a vacuum secondary carb in the 750cfm range.

Hedman 1 5/8" headers into a 2.5" exhaust with 50 series Flowmaster Delta Flows.

The engine will be infront of an A833OD overdrive 4spd and an 8.25" 3.55 sure-gripped rear end.