Lower control arm bushings*%#@#

375inStroke said

In one of the Mopar Mags, there was someone who suggested something like welding the washer on, but instead, you just put the washer in there, and hit the outer shell inward to cage the washer. You then press against the washer from the other side, and it's supposed to work great. Without a press, you can run a bolt through the washer, through a socket, and use a washer and nut on the other side to draw the shell out into the socket.

Click to expand...

That would be my good buddy Tom. He sent photos and wrote his idea in to Mopar Action. He likes to remind me how he got his fingers published. I watched him do it, works good, doesnt mar up wall inside of the control arm either. Just make sure its a big enough washer that it cant sneek out past the folds. He uses a small enough pipe to go thru the control arm and wails on the pipe with a BFH.
I have a good wirefeed welder so I do the welded idea. ----and a BFH.:toothy7: