727 Kickdown Linkage Adjustment - HELP!

The method in the service manual is confusing to even the best mechanics so I allways tell everybody to adjust it the way your buddy told you. The only thing is it sounds like yours is allready shifting at too high of an rpm so all you really need to do is adjust the rod at your carb to make it shorter. If you shorten that rod it will shift at lower rpm's. If you lengthen that rod it will shift at higher rpm's but you have to watch out how much you lengthen it cause if you go too much it'll not allow full throttle like BWDART said his does.

BWDART if you just back off the adjustment a little it'll still shift the same but it'll let you get full throttle.