Setting valve lash

smallblock chevy adjustment guidelines.. kinda one size fits all thing. attention CompCams: NOT.
anyways, I just put the lifter on the heel of the cam lobe, and crank her down 1/2 turn
from zero lash. a good way to determine zero lash is to spin the pushrod lightly until it stops.
NOTE: make sure there are no more then 1-1 1/2 threads showing out the bottom of the rocker.
if theirs more then that, bad things will happen. i assume you bought the complete set. so u should be ok.
If you made your own, you will need longer pushrods. anyways, hope this helps yah.