First time pulling the motor

Done this two different ways. One was hooking the hoist to the hood latch support, the other was bolting a chain in using the sockets for the adjustable hood bumpers. I had a 4x2 dolly that would roll around with a fully assembled K-frame, engine, & transmission. I jacked the rear of the car up as far as my jack stands would reach. Jack stands placed under rear axle tube so car could rotate without slipping off. I took off carb so I wouldn't have to lift so high. Rather than simply disconnect the steering coupler, I pulled the steering column. I found coming in from the bottom much easier than going in the top.