switching from glass fuses to blade fuses

I made my own adaptors. I found some "female" terminals that fit over the "male" legs of the blade type fuses, crimped short pieces of 14 gauge wire on, and then soldered the unterminated end of each wire to the ends of the glass fuse (basically a blade type fuse in parallel with the glass fuse). I then "blew" each glass fuse "open". I then populated each adaptor with the same Amp rating as the glass fuse they are to replace. Much easier to find and replace the blade type fuses in a hurry. Been this way for about 3 years, with no trouble. And can be returned to "stock" in minutes (for those interested in originality).