340 Air breather

Chev, I have enough parts you can build one. I had a spare base that, in 1979, I drilled a few holes in the rear of to hold nitrous solenoids, I pulled off the breather tube to run the wiring through, and I drilled a few 1/2" holes underneath it. It will need the breather tube pushed back on and if you want it perfect, you will need to weld small plugs in to fill holes.

I also have a later model top that is the same as the 70-71 and it needs blasted and along with the base, you can re-wrinkle finish paint it. Maybe Leanna Cuda Chick (the powder coater) can fix you up very nicely on this.

Most importantly for you restoring yours, I have a brand new (not repro) orange factory 340 pie tin. I still have it in the vintage 1970s factory sack it came in (the label is dated 1972).

So, if you are willing to do some minor rework and restoration, this will be a beautiful addition to your restored 340 project. I can get few pictures up soon if you or anyone else is interested.


Tom
[email protected]