Looking for an 8 3/4 rear,complete,in/near VT

-
Status
Not open for further replies.

MoparVT

Well-Known Member
Joined
Nov 9, 2008
Messages
66
Reaction score
0
Location
Barre VT
Rating - 0%
0   0   0
Contact seller
I am looking for (an A body) 8 3/4 limited slip rear,complete. Prefer 3.2-3.9 gear. Also if it has been converted to LBP is a big plus!!

I am in VT so looking for something nearby


Thanks
 
i have one in pa, see parts for sale ad.
 
I have one but it's got the SBP axles. The center section is all redone with new 3.55 gears and all new bearings and seal. Has a small U-joint yoke on it and is the 489 case. If you're interested let me know and I can give you more details and pictures.

Ken
Edison, NJ
rider1454@aol.com
 
Still looking for an 8 3/4 (LSD) and again....I am looking for a COMPLETE ,end to end,not just a center section.

If you are not in or near central VT,you must be willing to ship (at my cost of course)

Will consider just the axle housing....
 
The rear that I have is complete, drum to drum, but as I said, it's got the SBP axles. 10"x2" brakes that look really good. New 3.55 gears with all new bearings and seal, 489 case but the small U-joint yoke. Shipping is no problem, I can put it on a pallet and take it to a truck freight terminal. I also have an empty housing it you wanted that instead of the complete setup.

Ken
Edison, NJ
rider1454@aol.com
 
The rear that I have is complete, drum to drum, but as I said, it's got the SBP axles. 10"x2" brakes that look really good. New 3.55 gears with all new bearings and seal, 489 case but the small U-joint yoke. Shipping is no problem, I can put it on a pallet and take it to a truck freight terminal. I also have an empty housing it you wanted that instead of the complete setup.

Ken
Edison, NJ
rider1454@aol.com

Thanks Ken, PM sent...... I misunderstood the message you sent me,I thought you were only offering me the center section.......
 
I can offer you a center section, complete drum to drum or just the housing. Whatever you need.

PM sent back.

Ken
 
moparVt,
i have complete 8 /3/4 ,323 10inch hubs out of 68 cuda
i live in pa close to n.y line.
small bolt pattern.
also have 391 center.
if your interested contact me ,later
 
I can offer you a center section, complete drum to drum or just the housing. Whatever you need.

PM sent back.

Ken
Got your PM,so I didnt misunderstand your first message.Thats what I thought.....too rich for my blood,thanks anyway.
moparVt,
i have complete 8 /3/4 ,323 10inch hubs out of 68 cuda
i live in pa close to n.y line.
small bolt pattern.
also have 391 center.
if your interested contact me ,later
How much?
 
Status
Not open for further replies.
-
Back
Top