Engine Install with TTI Headers
Thanks everyone for all the ideas. I used my old engine/trans and took the header back off the car to put on the old engine in order to mock up the lines. Bolted starter to the old engine to. Then I carefully bent up the new lines out of 5/16" tubing I got at a local auto parts store. I had to use a compression fitting and the forward part of the return line because 5' was not long enough. The feed line is one piece though. Here are the pics:
Thanks everyone for all the ideas. I used my old engine/trans and took the header back off the car to put on the old engine in order to mock up the lines. Bolted starter to the old engine to. Then I carefully bent up the new lines out of 5/16" tubing I got at a local auto parts store. I had to use a compression fitting and the forward part of the return line because 5' was not long enough. The feed line is one piece though. Here are the pics:
