Whats everone working on?

-

THEWHITEZOMBIE

Mopars an Heavy Metal
Joined
May 22, 2004
Messages
1,552
Reaction score
48
Location
Burney Ca.
Just to get it going What is everone working on?im working on getting the zombie running having a few probs with my timing that i cant fig. out and the idea af tearing down the engine to set the cam right with a wheel!
 
I'm working on my Cheeby truck. I pulled the catalitic coverter off today & knocked out the insides that were rattling around, I have to replace the A/C compressor, rebuild/replace the tranny, a brake job, replace the front & rear seals and put new shocks on it.
 
I finally got around to putting the right power valves in. I adjusted the Caltracs. I also fixed an exhaust leak.
 
Been helping my brother off and on working on his 69RR.I did all i can to my car until i get my roll control from Jeg's and ordered an aluminum master cylinder from HawaiiDuster :D Other than that yard work :(
 
preliminaries on my Valiant. tearing the carpet out to find all the spots in the floorpan that need to be replaced, and replacing the carpet itself...
finding rust panels for the rear quarters... and planning what all needs to be done to get it looking good..
but right now, brake job, and monster tune up.
 
Hauled it down to the shop today for its preliminary wheel alignment, then need exhaust, windshield, seats, wet sand and polish, work the bugs out....... I hope I'm done this year!
 
I am working on wiring the 7AL-2 in my Dart. Once I get that and get the battery relocated to the trunk...then it is on like popcorn.

Whoo hooooo

71DartPa220006.jpg
 
damn, thats a mean looking dart!
i want a dart so bad :(
i love the bodies on them, so attractive to me!
 
hey sleg u hav two darts?i love the blue one iv seen it on the web a few places and i just love the beater look thats what i think im going for but with a hint of RUST on the top!HAHA What motor are u going to run in the green one?
 
Sledgehammer said:
How is this for mean.....LOL

nov112001.jpg

My NOS go whoooop whooooop!
Dude thats the coolest pictur that iv ever seen,Man thats bad *** to bad your wheels are on the ground!HA :twisted:
 
Thanks....you should see the actual picture. You can see bolts flying in the air. The hood scoops came off with so much force the one on the driver's side hit the roof right above my head and dented the chrome and the roof but didn't break the fiberglass scoop.

It ruined the steel hood...if you noticed it almost ripped it from the hinges in the back. But I am happy to say I made it back for first round. Car ran fine...just ran out of nitrous. LOL.

Dodge Tuff and keeps on Tickin!!!
 
I did spend a few hours the other day sorting through the pile of parts that we threw into the K-car when I picked it up. Pieces of a red interior and pieces of a brown interior, but not enough of either one...
 
LOL...I am probably gonna start putting the Pep Boys carpet in the back of the Dart tomorrow or Tuesday. But I need to finish the wiring of the 7-AL so I can get ready to return to competition.

Man...I love the look of your car from the back. Those meats make it look so tough.

71DartP10150022.jpg
 
Sledgehammer said:
Man...I love the look of your car from the back. Those meats make it look so tough.
It's funny to watch people look from the side and then look from the rear. From the side you don't realize how wide the tires are. 10 inch rims with 7 1/2 inch backspacing. 28X13.5 inch tires. Stock wheel opening.
tightfit.jpg
 
Hehe...I wish I could say the same....

29.5 x 10.5w x 15 Mickey Thompson slick on a 12" wide centerline with a 5" backspacing. I will confirm that tomorrow.


71Dartrim.jpg
 
LOL...it is time for me to go to bed....nite nite.....thinking of the Dave Chapelle Show....just after saying that.

Anyone that seen that commercial knows exactly what I am talking about.....LOL :lol: :lol: :lol: :lol:
 
Hawaii if yours is in a holding pattern mine is in high orbit. I went home this weekend and pulled the car cover off. Its like going to a family grave site. I felt like I had to do something so I gave her about the sixth coat of wax this year. Checked the trash bags around the old short block and shed a tear. Promised her "one of these days" and covered her back up. Put a little water on my money tree seeds and left.
 
My money tree got pruned big time back in 2001 thanks to 9/11. I am not happy that it is now almost 3 years later...and nothing has changed on my car. The only thing different soon is that I will have hooked up the transbrake. I have never used the brake on the Dart. Otherwise the motor is the same motor that came with the car back when I bought it over 10 years ago.

I am thinking about building a 392" Hemi from PAW. Has anyone had any experience with them or seen that kit?
 
-
Back
Top