4 speed with 440

I did this swap, You can look at my whole progress here.
http://www.forabodiesonly.com/mopar/showthread.php?t=33454

I found that brewers performance was a big help.

My link above has all the casting number for the bells that work, Modified parts that work or not, problems that I had, and how I over came them. Oil pans that you will need, Stearing linkage issues, Drive shaft adjustments ( shortening if needed or not). It all depends on if you are using motor mounts or motor plate. You will prob learn some things if you read my whole post. But this isn't the ONLY way you can do the swap I used an A body 4 spd, and you are not You will have to do more adjustments like the shifter, tranny cross member, and drive shaft, I didn't need to do any of that.

ANYTHING IS POSSIBLE, if you have the time, or knowledg, or money...or all of the above !
but nothing is better than a 440 4spd!

The one advise I have bout the build is be carefull, LOTS of people will tell you how to spend your money. Some stuff you DO need, but other stuff arn't a necessity even though they are telling you to buy it. It's way easier to spen other people's money!

Phil