Does this 360 seem like a good deal?

forgot to put all the info in. here it is. quoted from tha ad

"420+hp 360 . 6000 miles on motor broken in correctly

synthetic oil used exclusively

performance parts list

060 over with Kieth black flat top pistons UEM-KB107060-8 $197.39
10.9 runs 91 only
Mopar Performance High Performance Oil Pump $59.95

cam gear with hardend tip $50

aluminum edelbrock performer rpm heads EDL-60779 $716.50 x2

edlbrock carb 750cfm EDL-1407 $269.95

lunati voodoo 268 513 cam LUN-60403LK $179.95

Edelbrock Performer-Link True Roller Timing Chain Sets EDL-7803 $59.95

msd pro-billet e curve distributor MSD-8504 $375.95

blaster2coil MSD-8202 $35.95

roller rockers from racer brown. 1.5+1.6 the very best for mopars $499

Racer Brown Billet Hold Down Kit $99.00

Holley high flow 80 gph 7.5 psi fuel pump HLY-12-838 $67.95

Edelbrock Single-Feed Fuel Line and Filter Kit EDL-8134 $51.95

-6 braided line with reusable fittings to carb $100

Malory plug wires MAA-775 $37.95

Powermaster XS Torque Starters PWM-9513 $224.95

new brackets and pullys dpe $200

rings gapped for 200 shot of nos motor never had nos run through it though never got around to getting a kit

$500 in machine work +$200 for gaskets rings berings

professional products highrise air gap I payed $200 at local speed shop

probably missing some stuff but these add up to 4752.99

I retarded the cam 2 degrees off lunaties center line so she would run on pump piss I meen gas. plus my ignition timing set to just barely run on pump no pinging or knocking. I painted it all blue when I put it in the truck for the stock sleeper look.I never did have it dynod but edlbrock did a build up of a 340 with less cam compression and cid. to the tune of 420hp this thing's a beast in my truck and was a rocket in my 3100 lb car I had it in"