Call me cRaZy

:confused: I think I've finally lost it.
I just came in from marking the balancer.
I need to do a leakdown test and to make things easier, I figured I would mark out the balancer.
Hmm, Starting from the TDC groove and using the 20degs the timing indicator has (factory cover), I marked the balancer every 10deg. Put a nice mark acrossed the surface at 90, 180, and 270. kept marking all the way back to TDC and get 350deg angry9:

What the heck.
So I recheck all the way around again to make sure I didn't miss a mark or count wrong. Still get 350 deg.
Somebody shoot me now.