Dirtbag Duster
Rebuilt the front suspension. Used RMS strut rods. Very Nice.
I also used Bill's tubular upper control arms with sperical bearings.
I bought a '73 anti sway bar, which goes through the K member. Nice clean look. The '72 would have worked too, but it mounts in front of the k member. I had to make mounts for the lower conrol arms either way, so it didn't matter whether I used the narrower '73 bar, or the wider '72 bar. I also made some end links that eliminate the upper rubber bushings. Without tosion bars, you could move the spindle by hand, and the spindle on the other side would move with it. Nice. The lower control arm uses rubber bushings and the anti-sway bar has a couple poly bushings. All the other bushings are gone.
Rebuilt the front suspension. Used RMS strut rods. Very Nice.
I also used Bill's tubular upper control arms with sperical bearings.
I bought a '73 anti sway bar, which goes through the K member. Nice clean look. The '72 would have worked too, but it mounts in front of the k member. I had to make mounts for the lower conrol arms either way, so it didn't matter whether I used the narrower '73 bar, or the wider '72 bar. I also made some end links that eliminate the upper rubber bushings. Without tosion bars, you could move the spindle by hand, and the spindle on the other side would move with it. Nice. The lower control arm uses rubber bushings and the anti-sway bar has a couple poly bushings. All the other bushings are gone.
