One last go at roof rail seals

i bought mine from steele and i have a similar problem in the top rear corner on both sides but nowhere near like the ones in your pics. i had to put a small amount of windshield adhesive in the track to get it to stay up into the rail, then go all the way around the inside edge with a plastic windshield tool and push it the rest of the way into place. then i adjust the window stops and guides to match the pressure surface for it to seal properly.as i said mine were not as bad as yours but, the glass dont leak at all.if you close the door on a dollar bill you should just be able to pull it slightly out with a slight tug. i'll try to get you a pic of the adjusted window on the seal. it may help. dont give up though.we need these parts from the a/m to be at lest as good as original(lol)