' 65 barracuda headliner instalation questions????

I did mine with the glass out and side window channels off.I dont think you
can get a good stretch on it with the glass in,the headliner is pulled back on those window jambs.Glass seals then installed over it.

Reuse your original bows,straighten if need.And make sure you have the 2
wires that hook on the rear one.I lost one and you have to have it when the liners stretched.

I shortened a few of the bows so they would fit right but if you marked there
position when they came out you should be ok.

I used household carpet padding,cut and glued to the roof.

If you have a sunny day its best to leave the liner in it,loosens it up.If not stretch it out and leave out of the box for a few days,they really pack them in there.

The glue we used on the ends was for viynl roofs,you want something strong!Glue the front ,rear and sides.

Then alot of stretching and trimming.I had no interior in the car and that
makes it alot easier as well.It gets tricky on the b pillars,i made new templates for behind the liner,that cardboard like stuff,the liner needed
glued to this.Carefully,you dont want it coming through the perforations.

Access to a steamer when your all done is a plus,nothing else some good hot days will usually shrink it up some.Good luck!