ABS Headliner update

I installed the ABS headliner this afternoon, start to finish 3 hours. Now that was with no help and to be honest I don't think I would want any. I took the advice from someone here and hung a small piece of wire down from the center light and used a 2 foot wood dowel with a couple thick bound up rags on each end as not to ruin the liner. That was the best helper I could have asked for. Someone asked about the clips that go on the sides!! don't bother until your done. My process was sun visors first, then dome light leave all screws loose. The only thing I didn't like was they give you holes for everything BUT the rear view mirror, that would have been handy.
The other tip is don't worry about if you need to drill a hole into the headliner the covering will not rip. I drilled out larger holes in the liner where the mirror went which made it easier to find the holes when installing. The other thing is you might have to trim the liner at each corner by the pillers seemed a bit big.
Hope this helps future members.
AL