Got a windage tray I'm thinking of putting on a 318. It didn't come with instructions. Anybody have them or a torque spec for the main cap bolts when I'm putting it back together?
Though the LA windage tray requires using different main bolts on the 2nd and 4th main, the torque value on the mains is the same, 85 ft/lbs. I've always tightened to 45, 65, then 85 ft/lbs working from side to side on each cap to keep the caps from binding or pinching the bearings. The smaller bolts that hold the tray, I've torqued to 30 ft/lbs and have had no problems.