rearend alingment HELP!!!!!

I am by no means an expert, but this is my take:

as long as the angle is not severe, it should work fine. I read that the angle should not exceed 3 degrees - so if it's within that limit, it should be no different if that 3deg is sideways or up and down. It's within the limits of the u-joint. One of the thing you need to look at is interference with the floor boards since it's not aligned w/ the tunnel. The rear obviously will travel up and down - make sure the pinion doesn't hit anything - not to mention the driveshaft must be clear of all things as well. Other than that, you shouldn't have a problem.