A body 8 3/4 axle length

furz4 said
Yes that makes sense. It looks like the adjuster will go from about 2 1/8 to just a bit over 2 1/4 I'll get out the caliper and get a more accurate measure. I had this done standard offset so both axles will be the same length. I can see now why alot of people just pull the block and use the greens.

I belive the adjuster will go a full 1/4, on the greens you measure from the bearing step inside the housing
same process for spline depth, suregrips have to be more precise opens engage much sooner, on a side note:
I realy like the work moser does with my axles they cut the splines nice and long with the taper at the End
Last work I hade don Was fantastic as usual from them~