t5 trans swap?

the adjustable throwout bearing is made by Mcleod pt# 16515. the biggest problem I had when starting this project was finding info on which components to use, Mopar or Ford. The hydraulic T.O. bearing is by far the best way to go but is also the most expensive. Mcleod pt# 1319. If you use Ford parts w/o the hyd T.O. bearing you have to use a push slave cylinder to operate the clutch fork. If you use the mopar clutch fork a pull type slave cylinder must be used. I couldn't figure anyway to use a cable type of setup because of the shape of the bellhousing.