Timing ??

george said

Just checked the Lunati website, they have a cam almost identical to my off the cuff cam recommendation, [email protected], .520 lift, 106 lobe separation. i would check the retainer to valve seal clearance, other than that you should be good to go. What valve springs are in the motor?

Click to expand...

Not real sure, trying to find out. I've got to put a new cam in it tho, the old one must have been walking cuz the gear on the Dist./oil pump drive is chewed and shot and the gear on the cam has seen better days. Any ideas what I can do? Does anyone make a cam button?