Weight Transfer and Suspensions

Is this a drag car or a street car or a street/strip car?


Sounds like you are on the right track. Mabby some S/S springs on the rear or a set of caltracks with mono leafs wroks well. A set of 90/10 front shocks on the front. Some people like to run a slant six T bar to help with weight transfer. Take all the weight you can off of the front of the car. If you don't need i get rid of it. If you need it can It be lighened or mabby moved back to the trunk. Mabby a set of light weight wheel for the front and some skiny tires to help cut down weight and friction.


I do not run sway bars as they hurt weight transfer and put un needed weight on the car as do boxed control arms. They don't need boxed. You could run some tube upper control arms though. They will give you more ajustment options for setting up the front end.


Some of these mods may not do so well on the street but there they are.

Good luck.