Dougs headers blues

Got the Doug's headers installed today after I got my parts from Mancini and Brewers.

Doug's do work with the 10.5" bellhousing and clutch. You have to get a few parts from Brewer's Performance to relocate everything to the stock location. They do all the work for you if you are not up to fabbing your own stuff.

Here is what you need from Brewer's to convert to a 10.5 bellhousing with Doug's headers:

-Bell housing fork pivot
-Bell housing ball stud bracket
-New Z-bar or modify your own
-10-7/8 Clutch throwout fork from a B/E body

The stock adjusting rod works but you may need to bend it. Just be careful not to break it like I did. Had to weld it back together.

Once I got the parts together everything cleared just fine. You may need to shim the motor depending on your K-frame tolerances.