Wanted:stock air cleaner & valve cover breather

-
Status
Not open for further replies.

edb_app

Well-Known Member
Joined
May 4, 2009
Messages
169
Reaction score
0
Location
Seattle, WA
Rating - 0%
0   0   0
Contact seller
Currently I have this little dinky air cleaner on my car and I was advised to "Get that lawn mower air cleaner off"! So here is my post... Not exactly sure what info is needed, but its a slant 6 in a 75 Duster.

Thanks for reading and please let me know!!
 
Currently I have this little dinky air cleaner on my car and I was advised to "Get that lawn mower air cleaner off"! So here is my post... Not exactly sure what info is needed, but its a slant 6 in a 75 Duster.

Thanks for reading and please let me know!!

i have one for ya azmopar@aol.com
 
Here is a pic of what I have now... There are tons of things blocked off with screws and such... so take a look and let me know if anything you have would work and if it is pretty simple to install.

DSC06013.jpg
 
If you can get the diameter of the opening on your carb, I would be happy to take a measurement. If that fits, it would be an easy install and you could hookup the heat riser (coming off exhaust manifold) as well.
 
Hey Ben,looks like standard one bbl opening
If you can get the diameter of the opening on your carb, I would be happy to take a measurement. If that fits, it would be an easy install and you could hookup the heat riser (coming off exhaust manifold) as well.
 
If you can get the diameter of the opening on your carb, I would be happy to take a measurement. If that fits, it would be an easy install and you could hookup the heat riser (coming off exhaust manifold) as well.

The inside or outside of the carb without the air filter...and I can get that to you in the a.m. how much would you charge shipping?
 
The inside or outside of the carb without the air filter...and I can get that to you in the a.m. how much would you charge shipping?

The OD (outside diameter) would be good and yes, tomorrow is fine. Re: shipping. If you PM me your city/st/zip, I will check with UPS and USPS to see which one is more affordable.
 
Lol Illl see if I can get the measurement for a one bbl,the one your showing kinda look's like a 318 or a super six air cleaner.........I'm in sunny/rainy at the moment florida so I doubt I'm the stalking type.but let's wait till she post's pic's of the car I might become that type!!!Other than that just tryin to help maa'm.....nuthin I wouldn't do for the other people here...maybe =) keep up the good work on your lil' mopar,were here for ya!!!
Is he stalking you too? Man oh man, Waggin gets around. ;)
 
The OD (outside diameter) would be good and yes, tomorrow is fine. Re: shipping. If you PM me your city/st/zip, I will check with UPS and USPS to see which one is more affordable.

2.25" from the brackets that stand up off of the carb.

The gasket is 3" OD.

Let me know if this sounds right... and the PM is being sent right now...
 
Status
Not open for further replies.
-
Back
Top