Doug's Headers installed with some clearance issues

I am having problems with my dougs headers touching the drivers side torsion bar and steering box. I took the engine mounts out (they are about 1.4" thick). With no mount on the passenger side and the 1.4" mount in the drivers side i get about 3/4" gap between the torsion bar and headers on the drivers side, and the engine is 3" offset to the passenger side now. I think if i put a thinner spacer (maybe 1/2" thick) on the passenger side I could get this to work out.

I was wondering if anyone could give me some measurements with your headers and engine mounts.

- how thick are your engine mounts?
- how much clearance is between the torsion bar and header on both the drivers and passenger side.

its looking like this could work out now!

thanks,

Steve