Cam HP capability

Sorry to not getg back to this Mal... I had to go back and re-read...lol. The reason I go with more lift is simple... Lift is lost thru valve angles and lash. I said in a previous post that we want to make use of what we have. You know what the heads flow at .550, and they should be fairly strong at lower lifts. So the further you open the valve, the more air can get in with the same duration. There is a serious increase in flow from .400 to .500. The higher lift means after lash and angles you will definately be reaching the 200cfm mark with my choice. You might with the XE282s because you wont be opening the valve past .478 lift and you're not over .400 for very long. Sorry I took so long Mal.
Dave