Replacing Ignition Switch in 73 Duster

Okay, I just put the new switch in. I cut the little black wire and taped it up (I don't really need the shift indicator light). As for the little switch under the key, I left it out.

Now, at first I left the 6 fuse out of the car. I hooked the battery up and turned the key, it sounded like the solenoid clicked but the car did not crank.

2nd try: I put the 6 fuse (which had been blowing as soon as I turned the key before) in. Now, it looks like the gauges work again (at least the oil and brake lights do, and the temperature should be about as low as it can be with the car being cold. Also I think it is about out of gas). But here's the weird part: the car cranks in the ON position. It also cranks in the START position. I also have a new key position that is turned back from the lock position.

So, what's up? It seems like if I get this switch functioning properly everything will be good to go. The fuse does not blow anymore. It seems like this new switch has 5 positions it can be in, two of which crank the starter.