Thanks. The motor will not fit with both headers on the car. If the frame rails were 1 inch wider it would not be a problem at all. It just barely scrapes the paint of the inner fenders. I leave the driver's side on because it's the hardest with the power steering and all. The passenger side is fairly easy to put in. The thing that sucks is putting the 90* oil filter back on. The bolt is a little difficult to get to and has to be clocked perfect.
The sway bar is from Addco. It fits okay but I'm not a fan of the mounting bracket. It mounts basically as you see it. 2 bolts into the front K-frame each side. Then an L-bracket behind that bolts to the underside of the k-frame. These are factory holes for the front 2 if I remember correctly. You have to drill for the lower two.