Superstock Springs look like a lift kit !

DonnieLawson said

I moved the Dana back 1" , this centered it in the wheel well . I also have the front hanger drilled 1" higher .
Its just way to high now with the super stock springs .
I think a 29" would slide right in there .
Whats the cross section width of your tire ?
and how much spare room do you have ?
I was going to get my tires at Jegs tomorrow after the Goodguys show in Columbus Ohio, now I need to get this straightened out .

Click to expand...

Donnie, you never said what size wheels and backspace you are using, and wether or not your rear end is stock or narrowed.

With a stock rear end you will need 7.5 inch backspace no doubt with a 15x10 wheel.

You might want to get one of those wheel measurement tools just to be sure your wheel/tire combo is right before you spend your $$$.00.

My cross section is 12.5 sidewall face to sidewall face and i have 1/4" between inner sidewall to springs and 1/2" between outter sidewal face to wheel lip.

My wheel lips are not cut or rolled flat.