727 not shiftin to 2nd or drive

Hi I guess you know that the lokar T handle in front of the gear shifting handle has to be pulled up to shift it into first from second. The damn thing will shift from first into neutral without pulling up the T handle but then the lokar shifter will lock up in netural and sometimes the only way to get it to shift out of neutral is to disconnect the cable from the gear shift lever. Then play with the lokar shifter and see which way it will move. It you can get it to move into the park position, move the lever on the transmission to the park position and adjust the cable until it slips on and off the pin the cable slides on. You will need to shift it into each gear and check the cable to insure that it slides on and off the pin on the shift lever. REMEMBER THE T HANDLE IN FRONT OF THE SHIFTER MUST BE PULLED UP TO SHIFT FROM PARK TO NEUTRAL. YOU CAN THEN PULL THE SHIFTER REARWARDS IN A ROCKING MANNER TO SHIFT INTO FIRST,SECOND AND THIRD. WHEN SHIFTING FROM SECOND TO FIRST REMEMBER TO PULL UP THE T HANDLE IF NOT AND YOU ACCIDENTLY SHIFT INTO NEUTRAL IT WILL STICK AGAIN. I DON'T KNOW WHY LOKAR MADE IT THAT WAY. SOME SAFETY ISSUE. I HAVE THE SET UP ON MY 1968 DODGE D100. IT DROVE ME NUTS UNTIL I GOT INTO THE HABIT OF PULLING UP THAT T HANDLE. I HOPE THIS HELPS.