Cylinder Heads 101

BJR; thanks for the advice! I will get after these heads sometime this weekend. I have to finish screwing with the intake manifold first.

I assume what you mean by making a mark with a sharpie, is to eyeball it and transfer the imaginary line for the inside of the pushrod hole to the inside of the port and then grind almost down to the mark. This will be a little hard since the ports are already gasket matched and nothing is left to directly mark on to, but I understand what you are saying. This looks like its gonna be alot of material !

Is there a way to repair a hole should one occur in the pushrod passage ? I assume JB weld or something like that would work ?

Thanks again !

:notworth: