new headers
2 things:
1. I have 1" torsion bars, and the pass side header would rattle against it at idle, but I have alot of cam, too.
2. That paint will last about 5 minutes, and then they will start to rust, it is inevitable. When I did my rebuild 1.5 years ago, I had the headers sand blasted, I came hoem and cleaned them up with some Klean-Strip Prep-All , and painted them with High Heat Duplicolor Silver with Ceramic. I then made a tinfoil box around the oven, and baked them for 1.5 hours, just like the can says. They are still silver, 1.5 years and 5500 miles later. Highly recommended!
2 things:
1. I have 1" torsion bars, and the pass side header would rattle against it at idle, but I have alot of cam, too.
2. That paint will last about 5 minutes, and then they will start to rust, it is inevitable. When I did my rebuild 1.5 years ago, I had the headers sand blasted, I came hoem and cleaned them up with some Klean-Strip Prep-All , and painted them with High Heat Duplicolor Silver with Ceramic. I then made a tinfoil box around the oven, and baked them for 1.5 hours, just like the can says. They are still silver, 1.5 years and 5500 miles later. Highly recommended!