A Body Shorty Stainless Headers

Im in the process of making a set of shorty Stainless Steel Headers for my 68' GTS with a SB. The car is a manual steering, manual brake car with an Automatic. The headers will ONLY fit this situation, they wont fit with power steering, or power brakes, or with a 4 speed. Im seeing if anyyone is interested in a set for there A body. The problem is they wont fit any other scenario as far as power steering, 4 speed, power brakes !! so dont ask !! Im making them to be a real nice header, plenty of ground clearance, and they will slip in from the top without moving the engine. You will though have to remove the steering column, intall the left header, then reinstall the steering column as the tubes snake around the steering shaft. Im buidling these for my own car, its a street car. They are about 20" long, 1 5/8" stepped to 1 3/4" with a 2 1/2" outlet. If any of you are interested, I will put them into production, but I have to sell at least 25 pairs to make it worth the production process. I will post pictures soon, just wanted to let you guys know what im doing ahead of time. They will sell for about $700 - $800 in 304 Stainless Steel, but dont quote me on that please. Again, the only will fit manual steering, manual brakes, and an automatic. The reason for this is that thats what my car is, and I dont want to comprimise my headers by making room for the Z bar, or the huge power box. My buisness primarily build race headers, and I though there might be some interested parties in these.

Thanks
Mark Lelchook
Performance Welding
Racing Headers
www.perfweldheaders.com