thanks to all so far for the great trouble shooting ideas. i tried to answer your "did you's" and "try this" as best i could. with this information does this change anyone's thoughts or add anymore ideas?
was thinking about the air lock thing. how can i make sure of that?
no springs in hoses, never had them, car ran perfect before.
ran with cap off, coolant is swirling around, car still reached about 230 in 15 minutes of idling. then boiled over when shut off.
not sure about fuel mixture or oil pressure. no pressure gauge, just oil light. using brand new 16lb cap but doesn't seem like pressure is building becuase when engine is hot i can open rad cap to first stop and no pressure is bled off and top hose is soft as can be but hot.
i know the engine is running hot because of a new temp sending unit and the factory temp gauge is at about 230 degrees. the coolant will over flow and is DAMN hot. it takes only about 15 minutes in the driveway at idle to reach this. or a quick 5 mile run. same problem existed with 2 thermostats, so i eliminated to check flow.
I've heard about a half dozen people mention about an air lock so i really want to pursue this but how would i do it? run with cap off? i filled the block through the top radiator hose with no thermostat, then topped off the rad after reconnecting hose.
ugggghhhh!!!!!!!