400+ HP x 2300 lbs x 11 sec Feasability

It is very feasable to do without stroking the engine. A 360 is capable of doing this. No need to stroke the engine. It can also be done on pump gas.

You'll need a 9.5-1 min. (Max for pump gas) ratio, fully ported heads, 1-3/4 headers, single plane intake would be my choice with a 800 cfm carb or well preped T-Q. The converter would be something I myself would order from Dynamic converters. The rear ratio would be a little high for hwy. use, but a ring and pinion of 4.56 and 30 inch high tires would be doable for short jounts. (Limited Hwy. use.)
The MoPar "tips" scection reomends the "657" mech cam @ .590 lift.

This engine should be well preped. Don't skimp on parts or there prep. Save the money on the stroker crank and build the 360.
Though the bennifits of added torque with a stroker are nice.