72 duster resto in progress

since these pictures were taken....I have taken the passenger side quarter panel completley down to metal....found one thin spot where it was just starting to get some rust so I cut it out and welded in new. the door is done and ready for prime,almost finished smoothing off the passenger quarter, wire wheeled the insideds of the fenders and the front framing that the fenders mount to.....under coated the insides of the fenders and the front framing, ran a new bead of sealant of the fender mounting serfaces and reinstalled the fenders. got the fenders almost all sanded down and smoothed off, popped some dents from the drivers side and there is one thing spot where rust started on the lower rear quarter that I am yet to cut out and weld in new. and then it gets a light coat of filler and sanding and its done. I ripped all the interior out,carpet was junk but everything else isl ike new. floors are all like brand new but I am still knocking all the paint off and undercoating before new carpet. dash is coming out so I can paint it to match the body (plum crazy purple) doors and jams and dash and any interior metal will be body color,engine bay is going body color aswell,trunk will get undercoat but I may still paint to body color also. biggest focus is getting the body done and I will worry about and engine set up after ward but the chassis is already done......just body then engine and some odds and ends...but I will be sure to update as i go along!