Whats the best aluminum cylindar heads?

Looking at your post---id bolt on a set of CNC ported eddy rpm's , 84cc , from Modern Cylinder head.


ok--so lets go 10.99 or quicker.

Eddy Rpm heads out of the box will do that on a 470-500" stroker--so should 440source Stealth heads

stock type rockers / stock offset. custom length pushrods .


when you go to a raised port or max wedge port, (eddy Victor head , etc...)you will start needing custom headers, Offset rocker arms , etc.. depending on the head . After that--the B1 is the way to go for wedges.

(Not an Indy fan here)

Heres 2 examples of what can be done with low buck Edelbrocks :

max wedge victors on a 508 / medium roller / victor intake/ 72 cuda, 8.78 ET .


basic hand ported rpm's on a 493 / flat tappet/ pump gas / 70 dart , 10.58 ET.


lots of options with Edelbrock models and then B1 for Big power