1/4 mile times

well yes... the reason i am going bigger fuel line and a fuel cell is one-ensure im getting good fuel... im going from small to big fuel line with a rusted old stock tank and this is not only a restore but also a street strip car. not doing that until neccesary but a good fuel system is always important. as far as fiberglass..the hood i had and the bumper and fender got smashed in a hit and run so i had a stock replacement fender and bumper went fiberglass for weight savings and price. I couldnt have a door that wouldnt open and a bumper dragging...just to explain that.
im going to fine tune the chassis as well , i like the super stock setup but im definitly going to get the pinion snubber in and the subframe connectors dialed in. then look at better cal-tracks set-up wich i do like.
Other then that i need to get a working tach since the one i bought dosnt work and i can see what its stalling at.
I would like 4:11s though since the car is still pulling allot at the finish line but i will do that if it still seems to need it.
I think the car has alot of potential as is and a good tune would do alot... even timeing and geting the carb dialed in.
This race was soo soo rushed i painted the car /cleared it twice do to problems and put the motor together and back in in 2 weeks.... imagine the things missed... we had midnights after midnights on the car and i went of knowing the timing was probly 180* off anyways so i know i dont need to put to much thought into those et's.
I think tuning the car in and getting the suspension set up better will do alot for the car though.

And as for as a cam goes, i have debated this for quite some time now and want to go a little bigger maby even solid cam but with stock flat top pistons i have clearence issued and need to rip into all that then which is a snowball effect of parts and money.. im thinking of getting stuff inline to upgrade cam and pistons that would be compatable with a stroker setup in the far far future so im not buying everything more then once but i would like to see what i can do on this motor.
thanks again everyone.