340 cam

Hey Green1 What size tire is on the car now?

Are the heads ported and to what level if they are?

If well ported, I like this Huges as seen from the Manciniracing web site. It should give a nice lope and the stall of the cobverter would seem to work with it and the rear gears;

L.A. Small Block Camshaft
Flat Tappet Hydraulic 108º LSA+3

Strip. 3400rpm stall. 4.10:1 gear. Single plane or 2x4 intake. Headers required. Stage II HP ported heads. 180psi suggested cylinder pressure. Hot street for stroker engines.

Intake Valve Lift 1.5 .569" Exhaust Valve Lift 1.5 .576"

Intake Valve Lift 1.6 .606" Exhaust Valve Lift 1.6 .614"

Intake Duration @.050 246 Exhaust Duration @.050 250

Lobe Separation Angle 108

Sweet Spot RPM 2800-6100
$160.00
HEH4650AL

Or this Comp extreme 284/296 with less lift for stock or mild prep worked heads;

RPM RANGE 2300-6500

ADV. DURATION 284/296

DURATION @ .050 240/246

VALVE LIFT .507/.510

LOBE CENTER 110