64 Barracuda - Need Picture & Measurement
Personally I think a 30" tall tire is too much, dont forget you want this car low to the ground. So not only making the tubs wider (which isn't hard) you would probably have to raise them up for adequate clearance, and that is no easy task. For me the 18 made the most sense, the 285-40 was the widest 18 I could find at 27" ( I wanted a 28") that fit on a 10" rim. I did find a 335-30 ( I think) but it was only 26" tall and needed a 12" rim (which are very expensive). I'll try and find you a pic tonight.Here's a PhotChop of KCOYLE's cuda with a 20" AR Torque Thrust M and a p295/45-20 mounted to it. I'm thinking 20's may be too large for this opening, and may have to go to an 18" rim, or possibly just a smaller series tire. Overall height/width of this combo is 30.5", but going to a 265/45 will reduce the height to 29.4" and will still fit on a 10" wide rim.
