Oil Filter Relocation

[/QUOTE] Thanks. Do you see the big bolt in the middle with the fiber washer on it? That's a plug to cap off that hole. If I remember right it's just short a 3/4 fine thread bolt and the fiber washer is an oil plug washer I got out of the parts bin at NAPA. That hole is originally where the bolt retains the filter adapter plate and the filter screws onto. Follow the port from it and you'll see it goes right over to the top fitting which is originally plugged from the factory so all you have to do is take out that plug and install the hose fitting. I could have ran the hose into the large port instead of the other place but it is a much bigger hole and at an odd angle and I would have had to use adapters to mate the 3/8 pipe fitting to it. I thought it alot easier and better looking to use the holes next to each other.[/QUOTE]
ok that is kinda what i thought just checking lol. i think i might have to do this sometime lol