Possible cam install

it will give you almost half a point compresion EXAMPLE 8.1 \\ 8.4
AND THATS GOING WITH A THIN .026 HEAD GASKET
STOCK IS A .040 HEAD GASKET
USE .010 SHIMS FOR THE SHAFTS
I DID THE SAME THING TO MY 360.
CUT THE INTAKE SIDE OF THE HEAD OR YOU WILL HAVE TO MAKE THE HOLES BIGGER ON THE INTAKE.
I HAVE 308 HEADS
NOT SURE WHAT YOU HAVE FOR CASTINGS
TAKE YOUR TIME AND TRIPLE CHECK EVERYTHING
AERO RACING HAS NEW HEADS FOR $400 DONE 318CI
$600 DONE 360CI
IF THAT IS A OPEN CHAMBER 318 HEAD JUST BY A SET OF 302'S OR 920S FROM THEM
302'S AND 920'S HAVE A CLOSED CHAMBER :-\"
302'S ARE SWILL PORT AND 920'S ARE A 1967 HEAD
I LIKE PURPLE SHAFT CAMS BUT THAT 262H COMP WILL WORK GOOD TO.

IT'S NEVER THE CAMS FAULT ,IT'S ALWAYS THE CROWD IT HANGS OUT WITH OR IN OTHER WORDS THE PARTS IT,S USED WITH.