Clifford headers: now no choke for BBD. What to do?

All you have to do is buy that electric choke you have pictured from carbs only. Make a little arm extender to put on the end of the arm to attach to the carb and then attach the choke puller on one of the holes on the head you use to attach a cherry picker to. The arm extender is because the hole on the head you'll be attaching it to is just a little further away from the carb than the original choke pocket it would normally mount on. Take the little choke thermostat deal and attach it to the other hole on the head. Get the two wires connected like the instructions say and you're ready to go. The thermostat will draw enough heat off the head and next to the headers to activate. All you have to do then is adjust the choke puller by turning the body of it and it'll leave the choke on longer, or pull it off quicker depending on your adjustment.