Pulling slants

if you are doing a whole swap inc k frame, here is how i did it

- get 4 good solid jack stands and mount under each corner
- use a GOOD lift or even a furniture dolly to rest under the trans and engine - maybe even bolt 2dollies together
- jack up the k frame and remove all 4 bolts
- use the cherry picker to hoist the front of the car (i actually put the rear wheels back on the ground when doing this because the car wanted to come forward a bit as i lifted the front en (not good if all 4 wheels are on stands!!))
- the you can slide the trans/eng out in 1 piece and do the same with the new engine

if i can do it on a shi&&y driveway that is way unlevel and nothing rolls easily, plus my lack of any real mechanical abilities, you can do it.

just an idea anyway.