My 67 Dart, Where to begin...
I got back to workin on the car... I trimmed the passenger panel for a near perfect fit. (it has a bit to big of a gap at the rear I had to try and fill with a couple beads) Then I drlled holes to weld it to the sub-frame. I also took the time to fab a plate from some steel to "box in" the frame rail beneath the floor. Hopefully this will give me a bit more rigidity when I get the sub-frame connectors welded in. I then held the panel in place with some weights, and some vise grips at the front. It still warped a bit trying to weld it to the thicker frame beneath, but overall it turned out ok. My welding is really improving, the drivers side should be a bit prettier.
I got back to workin on the car... I trimmed the passenger panel for a near perfect fit. (it has a bit to big of a gap at the rear I had to try and fill with a couple beads) Then I drlled holes to weld it to the sub-frame. I also took the time to fab a plate from some steel to "box in" the frame rail beneath the floor. Hopefully this will give me a bit more rigidity when I get the sub-frame connectors welded in. I then held the panel in place with some weights, and some vise grips at the front. It still warped a bit trying to weld it to the thicker frame beneath, but overall it turned out ok. My welding is really improving, the drivers side should be a bit prettier.