Installing new TC??

Fill the convertor the night before with 3-4 Liters of tranny oil and allow it to get the air out of it,easier to fill and get rid of trapped air.LOck tight the crank bolts and convertor bolts.Paint the flex plate in one corner.You will see that the flex plate is NOT a true square,one side is offset.Bolt the flex plate to the convertor before installing the oil and install all the four bolt.Paint one of the corners and the corner of the convertor,when you go to bolt up the convertor to the plate,match the paint on the plate to the paint on the convertor and all four holes line up first shot,Now send me some Guiness beer and we are even,Mrmopartech