440 pistons Help

eaglesguy1981j said
I noticed the cam was mentioned a few times. This is the one I had picked out. Will fit into what Im shooting for? Im shooting for 500hp give or take a bit on pump gas.
http://store.440source.com/Comp-Cam-Xtreme-Energy-Hi-Lift-545/productinfo/145-1228/

440 .030 over
TRW-L2355F30
Stock rods and crank
440 source Stealth Heads (Gasket matched)
Weiand D port T-ram 2x600 holleys (I know they dont run the best on steet but I like the look)
4.10 gears 28"tire
727 with 3000 stall

Cam looks good, i ran the XE284H in a 451 low deck with stock 906s, ran 10.9s at 120+, so with your set-up, that cam should work great, just make sure you get the Comp "Pro magnum" lifters, you'll be glad you did.

You may want to run a higher stall then 3000.