Winter time model building thread.
Here's a '65 Chevy p/u that I just finished about 3 weeks ago. I did an angle chop on the roof and wedged the hood to match. The tail gate as you can see swings out instead of down but if you look close you'll see the tailgate lettering is all cut out so you can see through each letter. The drivetrain is complete from the S-15 Syclone as is the interior. For those not familiar with the Syclone truck they were a limited edition and came with a 4.3L turbocharged V-6 and all wheel drive very fast. This build took alot of custom work as you can see. Pic # 3 shows the 2 kits used in this build. Thanks for the postive responses to my previous post it means alot
Here's a '65 Chevy p/u that I just finished about 3 weeks ago. I did an angle chop on the roof and wedged the hood to match. The tail gate as you can see swings out instead of down but if you look close you'll see the tailgate lettering is all cut out so you can see through each letter. The drivetrain is complete from the S-15 Syclone as is the interior. For those not familiar with the Syclone truck they were a limited edition and came with a 4.3L turbocharged V-6 and all wheel drive very fast. This build took alot of custom work as you can see. Pic # 3 shows the 2 kits used in this build. Thanks for the postive responses to my previous post it means alot
