I could use some help please....

I installed my scattersheild today. Wow.... I thought header bolts were a *****. Installing the perimeter 3/4" bolts around the sheild was a job! But never mind that, I need some help locating some odds-n-ends.

First off, I need a correct Z bar pivot bracket for the scattersheild end of things....I had to fabricate an extension that I doubt will last long. It seems that the bracket I need the 2 mounting bolt openings drop down further than the one I have.
I also need the front bearing retainer in the medium diameter. The opening in my scattersheild measures just shy of 5" across. I have the 4 1/4" & 5 1/8".... The size I need is about 4 7/8".

Needless to say, I threw the transmission in the car and brought it home with the transmission not really installed right. I only drove about 5 miles like this. I know I will destroy the input roller bearing and possibly the front main bearing, not to mention screw up the clutch. The trans is being held in by the bolts only, NOT the bearing carrier. Not good....

HELP!

Someone has to have what I need or knows someone who can help.

On a happier note, the oil leak is gone and the car runs great. Except I can't drive it now.... :puker: